Sannidhi Enterprises

• The Riello RDB series of one stage light oil and kerosene burners is available in eleven basic models, with an output ranging from 16,8 to 120 kW, in three different structures. 
• The models are available in light oil and kerosene versions, conventional flue and balanced flue, with or without the fuel pre-heater fitted. 
• A new model has been specifically designed to meet the increasing trends towards high pressure working field demand. 
• These models are distinguished by their compact size. 
• All the models use the same components designed by Riello for the RDB series. The high quality level guarantees safe working. The RDB burners are equipped with a geared pump suitable for Kerosene, Low Sulphur Kerosene and ultra low sulphur diesel oil (ULSD). 
• In developing these burners, special attention was paid to reducing noise, to the ease of installation and adjustment, to obtaining the smallest size possible to fit into any sort of boiler available on the market. 
• All the models are approved by the EN 267 European Standard and conform to European Directives for EMC, Low Voltage, Machinery and Boiler Efficiency. 
• All the RDB burners are fired before leaving the factory.

• The Riello 40 G series of one stage light oil burners, is a complete range of products developed to respond to any request for home heating. 
• The Riello 40 G series is available in ten different models, with an output ranging from 12 to 240 kW, divided into four different structures. 
• All the models use the same components designed by Riello for the Riello 40 G series. 
• The high quality level guarantees safe working. In developing these burners, special attention was paid to reducing noise, to the ease of installation and adjustment, obtaining the smallest size possible to fit into any sort of boiler available on the market.
•  All the models are approved by the EN 267 European Standard and conform to European Directives for EMC, Low Voltage, Machinery and Boiler Efficiency. All the Riello 40 G burners are fired before leaving the factory.

• The Riello Gulliver RGD series of two stage light oil burners, is a complete range of products developed to respond to any request for home heating. 
• The Gulliver RGD series is available in five different models, with an output ranging from 14 to 296 kW, divided in four different structures. 
• All the models use the same components designed by Riello for the Gulliver series. 
• The high quality level guarantees safe working. In developing these burners, special attention was paid to reducing noise, to the ease of installation and adjustment, to obtaining the smallest size possible to fit into any sort of boiler available on the market. 
• The two stage operation guarantees high level of thermal unit efficiency.
•  All the models are approved by the EN 267 European Standard and conform to European Directives for EMC, Low Voltage, Machinery and Boiler Efficiency. 
• All the Gulliver RGD burners are fired before leaving the factory.

• The Riello Gulliver RGD series of two stage light oil burners, is a complete range of products developed to respond to any request for home heating. 
• The Gulliver RGD series is available in five different models, with an output ranging from 14 to 296 kW, divided in four different structures. 
• All the models use the same components designed by Riello for the Gulliver series. 
• The high quality level guarantees safe working. In developing these burners, special attention was paid to reducing noise, to the ease of installation and adjustment, to obtaining the smallest size possible to fit into any sort of boiler available on the market. 
• The two stage operation guarantees high level of thermal unit efficiency.
•  All the models are approved by the EN 267 European Standard and conform to European Directives for EMC, Low Voltage, Machinery and Boiler Efficiency. 
• All the Gulliver RGD burners are fired before leaving the factory.

• The PRESS G series of burners covers a fi ring range from 140 to 356 kW and they have been designed for use in civil installations of small dimensions or in industrial applications, like incinerators or dyer kilns.
• Operation is  one stage the burners are fi tted with a microprocessor-based burner safety control box which supplies indication of operation and diagnosis of fault cause. The combustion head, that can be set on the basis of required output, allows optimal performance ensuring good combustionand reducing fuel consumption. The main feature of these burners is their reliability due to a simple and strong construction, which permits operation without particular maintenance intervention.
• Simplifi ed maintenance is achieved by the slide bar system, which allows easy access to all of the essential components of the combustion head. All electrical components are easily accessible only by dismounting a protection panel, thus guaranteeing a quick and simple intervention on components.

• The PRESS G series of burners covers a fi ring range from 140 to 356 kW and they have been designed for use in civil installations of small dimensions or in industrial applications, like incinerators or dyer kilns.
• Operation is ???one stage???; the burners are fi tted with a microprocessor-based burner safety control box which supplies indication of operation and diagnosis of fault cause. The combustion head, that can be set on the basis of required output, allows optimal performance ensuring good combustionand reducing fuel consumption. The main feature of these burners is their reliability due to a simple and strong construction, which permits operation without particular maintenance intervention.
• Simplifi ed maintenance is achieved by the slide bar system, which allows easy access to all of the essential components of the combustion head. All electrical components are easily accessible only by dismounting a protection panel, thus guaranteeing a quick and simple intervention on components.

• The PRESS G series of burners covers a fi ring range from 140 to 356 kW and they have been designed for use in civil installations of small dimensions or in industrial applications, like incinerators or dyer kilns.
• Operation is ???one stage???; the burners are fi tted with a microprocessor-based burner safety control box which supplies indication of operation and diagnosis of fault cause. The combustion head, that can be set on the basis of required output, allows optimal performance ensuring good combustionand reducing fuel consumption. The main feature of these burners is their reliability due to a simple and strong construction, which permits operation without particular maintenance intervention.
• Simplifi ed maintenance is achieved by the slide bar system, which allows easy access to all of the essential components of the combustion head. All electrical components are easily accessible only by dismounting a protection panel, thus guaranteeing a quick and simple intervention on components.

• The PRESS G series of burners covers a firing range from 107 to 1660 kW and they have been designed for use in civil installations of average dimensions, like building areas and large apartment groups or for use in industrial applications, like small or medium plants. 
• Operation is two stage; the burners are fitted with a microprocessor-based burner safety control box which supplies indication of operation and diagnosis of fault cause. 
• The combustion head, that can be set on the basis of required output, allows optimal performance ensuring good combustion and reducing fuel consumption. 
• The main feature of these burners is their reliability due to a simple and strong construction, that permits operation without particular maintenance intervention. Simplified maintenance is achieved by the slide bar system, which allows easy access to all of the essential components of the combustion head. 
• All electrical components are easily accessible only by dismounting a protection panel, thus guaranteeing a quick and simple intervention on components.

• The PRESS G series of burners covers a firing range from 107 to 1660 kW and they have been designed for use in civil installations of average dimensions, like building areas and large apartment groups or for use in industrial applications, like small or medium plants. 
• Operation is two stage; the burners are fitted with a microprocessor-based burner safety control box which supplies indication of operation and diagnosis of fault cause. 
• The combustion head, that can be set on the basis of required output, allows optimal performance ensuring good combustion and reducing fuel consumption. 
• The main feature of these burners is their reliability due to a simple and strong construction, that permits operation without particular maintenance intervention. Simplified maintenance is achieved by the slide bar system, which allows easy access to all of the essential components of the combustion head. 
• All electrical components are easily accessible only by dismounting a protection panel, thus guaranteeing a quick and simple intervention on components.

• The PRESS G series of burners covers a firing range from 107 to 1660 kW and they have been designed for use in civil installations of average dimensions, like building areas and large apartment groups or for use in industrial applications, like small or medium plants. 
• Operation is two stage; the burners are fitted with a microprocessor-based burner safety control box which supplies indication of operation and diagnosis of fault cause. 
• The combustion head, that can be set on the basis of required output, allows optimal performance ensuring good combustion and reducing fuel consumption. 
• The main feature of these burners is their reliability due to a simple and strong construction, that permits operation without particular maintenance intervention. Simplified maintenance is achieved by the slide bar system, which allows easy access to all of the essential components of the combustion head. 
• All electrical components are easily accessible only by dismounting a protection panel, thus guaranteeing a quick and simple intervention on components.

• The RL series of burners covers a firing range from 154 to 2700 kW, and it has been designed for use in low or medium temperature hot water boilers, hot air or steam boilers, diathermic oil boilers. Operation is ???two stage???; the burners are fitted with a microprocessor-based control panel, which supplies indication of burner status and fault causes. Optimisation of sound emissions is guaranteed by the special design of the air suction circuit and by incorporated sound proofing material. 
• The elevated performance of the fans and combustion head, guarantee flexibility of use and excellent working at all firing rates. 
• The exclusive design ensures reduced dimensions, simple use and maintenance.
•  A wide range of accessories guarantees elevated working flexibility.

• The RL series of burners covers a firing range from 154 to 2700 kW, and it has been designed for use in low or medium temperature hot water boilers, hot air or steam boilers, diathermic oil boilers. Operation is ???two stage???; the burners are fitted with a microprocessor-based control panel, which supplies indication of burner status and fault causes. Optimisation of sound emissions is guaranteed by the special design of the air suction circuit and by incorporated sound proofing material. 
• The elevated performance of the fans and combustion head, guarantee flexibility of use and excellent working at all firing rates. 
• The exclusive design ensures reduced dimensions, simple use and maintenance. 
• A wide range of accessories guarantees elevated working flexibility.

• The PRESS G series of burners covers a firing range from 107 to 1660 kW and they have been designed for use in civil installations of average dimensions, like building areas and large apartment groups or for use in industrial applications, like small or medium plants. 
• Operation is two stage; the burners are fitted with a microprocessor-based burner safety control box which supplies indication of operation and diagnosis of fault cause. 
• The combustion head, that can be set on the basis of required output, allows optimal performance ensuring good combustion and reducing fuel consumption. 
• The main feature of these burners is their reliability due to a simple and strong construction, that permits operation without particular maintenance intervention. Simplified maintenance is achieved by the slide bar system, which allows easy access to all of the essential components of the combustion head. 
• All electrical components are easily accessible only by dismounting a protection panel, thus guaranteeing a quick and simple intervention on components.

Leveraging the skills of our qualified team of professionals, we are instrumental in offering a wide range ofLight Oil Burner.

• The PRESS G series of burners covers a firing range from 107 to 1660 kW and they have been designed for use in civil installations of average dimensions, like building areas and large apartment groups or for use in industrial applications, like small or medium plants. 
• Operation is two stage; the burners are fitted with a microprocessor-based burner safety control box which supplies indication of operation and diagnosis of fault cause. 
• The combustion head, that can be set on the basis of required output, allows optimal performance ensuring good combustion and reducing fuel consumption. 
• The main feature of these burners is their reliability due to a simple and strong construction, that permits operation without particular maintenance intervention. Simplified maintenance is achieved by the slide bar system, which allows easy access to all of the essential components of the combustion head. 
• All electrical components are easily accessible only by dismounting a protection panel, thus guaranteeing a quick and simple intervention on components.